Panasonic PT-DZ6710 - Manual (Page 31)

PROJECTOR SETUP menu
E
NGLISH - 31
Settings
You can set the time zone and correct the time and date of
internal clock.
You can save various setting values as a backup to the internal
memory of the projector.
1. Press the ENTER button.
The SECURITY PASSWORD will be asked to perform.
2. Perform the SECURITY PASSWORD.
The confirmation screen will be displayed.
See “SECURITY PASSWORD” on page 35.
3. Press I to select OK, then press the ENTER button.
You can load the saved data in SAVE ALL USER DATA.
1. Press the ENTER button.
The SECURITY PASSWORD will be asked to perform.
2. Perform the SECURITY PASSWORD.
The confirmation screen will be displayed.
See “SECURITY PASSWORD” on page 35.
3. Press I to select OK, then press the ENTER button.
4. The projector returns to the standby mode to reflect the
saved data.
You can reset the settings to the factory defaults by the
selected mode.
1. Select the required mode to initialise.
2. Press the ENTER button.
3. Perform the SECURITY PASSWORD.
The confirmation screen will be displayed.
See “SECURITY PASSWORD” on page 35.
4. Press I to select OK, then press the ENTER button.
When initialising by ALL USER DATA, switch off the power
and restart the projector.
SERVICE PASSWORD is for a service person.
DATE AND TIME
TIME ZONE Select the current located time zone.
ADJUST CLOCK
Adjust YEAR, MONTH, DAY, HOUR
and MINUTE by pressing I H, then
select APPLY and press the ENTER
button.
SAVE ALL USERS DATA
NOTE:
• E-mail settings of NETWORK that is controlled by web
browser, and the image data for LOGO1 in BACK COLOR
and STARTUP LOGO will not be saved.
LOAD ALL USERS DATA
INITIALIZE
ALL USER DATA
All setting values including registered
signals in SIGNAL LIST, e-mail
settings of NETWORK, and registered
image data for LOGO1 in BACK
COLOR and STARTUP LOGO will
return to factory settings.
ENTRY SIGNAL
All registered signal settings in
SIGNAL LIST will return to factory
settings.
NETWORK/E-MAIL
All setting values in NETWORK
including e-mail settings will return to
factory settings.
LOGO IMAGE
The registered image data for LOGO1
in BACK COLOR and STARTUP
LOGO will return to factory settings.
SERVICE PASSWORD