Serial terminal, Nglish - 45, Technical information – Panasonic PT-DZ6710 User Manual
Page 45: Jconnection, Appendix, Qsingle projector q multiple projectors
Technical Information
E
NGLISH - 45
Appendix
The serial connector which is on the connector panel of the projector conforms to the RS-232C interface
specification, so that the projector can be controlled by a personal computer which is connected to this connecter.
J
Connection
Q
Single projector
Q
Multiple projectors
J
Pin assignments and signal names
J
Communication settings
Serial terminal
Pin
No.
Female
Male
Signal name
Contents
Signal name
Contents
1
NC
NC
2
TXD
Transmitted data
RXD
Received data
3
RXD
Received data
TXD
Transmitted data
4
Connected internally
Connected internally
5
GND
Earth
GND
Earth
6
NC
NC
7
CTS
Connected internally
RTS
Connected internally
8
RTS
CTS
9
NC
NC
Computer
Connecting terminals on projector
D-Sub 9-pin (male)
Communication cable (straight)
D-Sub 9-pin (female)
Computer
Connecting terminals on projector 2
D-Sub 9-pin (male)
Communication cable (straight)
D-Sub 9-pin (female)
Connecting terminals on projector 1
D-Sub 9-pin (female)
D-Sub 9-pin (male)
Signal level
RS-232C
Character length
8 bits
Sync. method
Asynchronous
Stop bit
1 bit
Baud rate
9 600 bps
X parameter
None
Parity
None
S parameter
None