Executing automatic editing, Automatic editing – Panasonic AJ-D750P User Manual

Page 38

Advertising
background image

Automatic editing

Executing automatic editing

Press the AUTO EDIT button.

Automatic editing is now performed.

To stop the editing at any time, press the STOP button.
When the edit OUT point is reached, the unit goes into the stop mode after

postrolling.

Postroll
With assemble editing, editing continues for approx. 2 seconds even after the edit OUT point
has been passed, the tape is rewound to the OUT point, and the unit goes into the stop
mode.

With insert editing, the unit goes into the play mode after the edit OUT point has been
passed, the tape is rewound to the OUT point, and the unit goes into the stop mode.

Retry function
If the AUTO EDIT button is pressed again after the STOP button has been pressed to stop

the editing, editing will start again from the beginning.

Auto tag editing

If the AUTO EDIT button is pressed when the next edit point has not yet been entered upon

completion of editing, the previous edit OUT point will be entered as the IN point, and editing

is performed accordingly.

To release the auto tag mode, press one of the tape transport buttons (PLAY, etc.).

<Note>
The entered points are automatically cleared after editing is executed. However, the
previous editing points can be recalled by pressing the TRIM+ (or TRIM–) and SET buttons
together.

1

- 3 8 -

Advertising