Panasonic AJ-D750P - Manual (Page 45)

USER menu
<BASIC>
Item Setting
No.
Superimposed
No.
Superimposed
display
000 P-ROLL
TIME
001 CHARA
H-POS
0000
0005
0015
0000
0005
display
0S
5S
15S
0
5
002 CHARA
V-POS
003 DISPLAY
SEL
0 0 4 LOCAL
ENA
005 TAPE
TIMER
006 SUPER
0012
0000
0018
0022
0000 TIME
0001 T&STA
0002 T&S&M
0000 DIS
0001 ST&EJ
0002 ENA
0000
0001
0000
0001
12
0
18
22
±12h
24h
OFF
ON
Description
This sets the preroll time which can be set from 0 to 15 seconds
in l-second increments.
<Note>
When the unit is set to automatic editing [PREVIEW, AUTO
EDIT], the unit will not operate if the preroll time is set to 0
seconds.
This sets the position of the characters on the horizontal
plane for the time code and other super displays output to the
VIDEO OUT 3 connector.
<Note>
1. When setting this item, the DISPLAY SEL status is output to
VIDEO 3 even if SUPER OFF has been set. However, when
the menu is exited, operation complies with the SUPER
OFF/ON setting.
Also, CHARA TYPE is output to VIDEO 3 according to the
status set in the menu.
2. When the DISPLAY SEL setting causes characters to
extend beyond the edges of the screen, the setting value is
changed so that the characters are automatically displayed
in a position on the screen.
This sets the position of the characters on the vertical plane
for the time code and other super displays output to the
VIDEO OUT 3 connector.
<Note>
1. When setting this item, the DISPLAY SEL status is output to
VIDEO 3 even if SUPER OFF has been set. However, when
the menu is exited, operation complies with the SUPER
OFF/ON setting.
Also, CHARA TYPE is output to VIDEO 3 according to the
status set in the menu.
2. When the DISPLAY SEL setting causes characters to
extend beyond the edges of the screen, the setting value is
changed so that the characters are automatically displayed
in a position on the screen.
This selects what information is to be provided by the time code
and other super displays output to the VIDEO 3 connector.
0: Time only.
1: Time and status.
2: Time, status and mode.
<Note>
The mode display is DVCPRO mode display during DVCPRO
format and DV mode display during DV format.
This selects the buttons which can be operated on the front
panel when the REMOTE/LOCAL switch has been set to
REMOTE.
0: No buttons can be operated.
1: Only the STOP and EJECT buttons can be operated.
2: All buttons except for the RECORDER and PLAYER
buttons can be operated.
This selects the 12 or 24 hour display for the CTL counter.
0: 12 hour display
1: 24 hour display
This selects whether the time code and other super display
which are output to the VIDEO OUT 3 connector is to shown.
0: Not shown.
1: Shown.
The underline on the setting item denotes the initial setting.
- 4 5 -