Panasonic KX-TG8231 - Manual (Page 11)

Preparation
For assistance, please visit http://www.panasonic.com/help 11
Connections
Connect the telephone line cord until it
clicks into the base unit and telephone
line jack (
A). Connect the AC adaptor
cord ( B) by pressing the plug firmly
( C).
Base unit
L Use only the supplied Panasonic AC
adaptor PQLV207.
L Use only the supplied telephone line
cord.
Charger (KX-TG8232)
L Use only the supplied Panasonic AC
adaptor PQLV209.
Note:
L
The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L The AC adaptor should be connected
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the
adaptor may cause it to become
disconnected.
L
The unit will not work during a power
failure. We recommend connecting a
corded telephone to the same
telephone line or to the same
telephone line jack using a Panasonic
T-adaptor (page 4).
I Answering device
Initial settings
Customer support
Icon Feature
Hooks
(120 V AC, 60 Hz)
To single-line telephone
jack (RJ11C)
A
B
C
B
(120 V AC, 60 Hz)
Hooks
Fasten the AC adaptor cord to
prevent it from being disconnected.
C
TG8231_8232.book Page 11 Thursday, July 19, 2007 3:22 PM