Pioneer VSX-1015-K - Manual (Page 35)

Listening to your system 05
35
En
Choosing the input signal
You need to hook up a component to both analog and
digital inputs on the rear of the receiver to select between
input signals.
• Press SIGNAL SELECT to select the input signal
corresponding to the source component.
Each press cycles through the options as follows:
• AUTO – The receiver selects the first available signal
in the following order:
DIGITAL ; ANALOG .
• ANALOG – Selects the analog inputs.
• DIGITAL – Selects the digital input.
When set to DIGITAL or AUTO , 2 DIGITAL lights with
Dolby Digital decoding, DTS lights with DTS decoding,
and WMA9 Pro lights to indicate decoding of a WMA9
Pro signal.
Note
• This receiver can only play back Dolby Digital, PCM
(32kHz–96 kHz), DTS and WMA9 Pro digital signal
formats (including DTS 96kHz/24 bit). With other
digital signal formats, set to
ANALOG .
• You may get digital noise when a LD or CD player
compatible with DTS is playing an analog signal. To
prevent noise, make the proper digital connections
(page 16) and set the signal input to
DIGITAL .
• Some DVD players don’t output DTS signals. For
more details, refer to the instruction manual supplied
with your DVD player.
RECEIVER CONTROL
SHIFT
THX
SLEEP DIALOG E
AUTO SURR
STANDARD ADV.SURR STEREO
MPX
AUDIO
CH RETURN
SUBTITLE
MIDNIGHT/
LOUDNESS
SIGNAL
SELECT
EFFECT
/CH SEL
ACOUSTIC
EQ
HDD
CH CH
DVD
RECEIVER
PHONES
TUNER
CONTROL
TUNER EDIT
SYSTEM SETUP RETURN PTY SEARCH EON MCACC SETUP MIC
DIGITAL IN S-VIDEO VIDEO
VIDEO2 INPUT
AUDIO L R
MULTI JOG MULTI JOG
TUNING/ STATION BAND MPX TONE ACOUSTIC EQ DIALOG ENHANCEMENT MULTI CH IN SIGNAL
SELECT EXTENDED MODE SPEAKERS MIDNIGHT/ LOUDNESS
MULTI JOG MULTI JOG
VSX_1015.book.fm 35 ページ ２００５年３月７日 月曜日 午後７時０分