Panasonic RG4-E02 - Manual (Page 110)

110
Tap
Start > Programs > TIPtalk.
A configuration dialog is displayed when you launch
TIPtalk for the first time.
Please refer to Configuring
TIPtalk section.
Calling an IP phone
1. From within the TIPtalk application, tap the
Contacts tab.
2. Select a contact from your contact list.
3. Tap
Call.
To end call, tap
Hangup on the screen,.
Answering a call automatically
To answer a call automatically, you must check the
Automatic answer box on the Configuration screen.
This application automatically answers, and redirects
the call to the answer message service, ten seconds
after the call is received.
Holding a call
From within the TIPtalk application, tap
Menu >
Voice Service > Hold while in a call.
To continue the call, tap
Menu > Voice Service >
Hold again.
Redialling using outgoing call history
You can store twenty contacts in the outgoing call
history contacts at any one time.
To redial using outgoing call history:
1. From within the TIPtalk application, tap
Outgoing
Calls tab.
2. Select an outgoing call history contact.
3. Tap
Call.
Calling back using incoming call history
You can store twenty contacts in the incoming call
history contacts at any one time.
To call back using incoming call history:
1. From within the TIPtalk application, tap
Incoming
Calls tab.
2. Select an incoming call history contact.
3. Tap
Call.
Muting the microphone