Panasonic RG4-E02 - Manual (Page 78)

78
exchange data with the other device.
Setting up an outgoing Bluetooth
COM port
Some programs can only establish a connection
through a serial (COM) port, even if the device itself
is Bluetooth-enabled. To make it possible for such
programs to use a Bluetooth connection, you must
set up a virtual COM port. Once created, this virtual
port can be used like any other COM port. You can
use a virtual COM port for programs that, for
example, connect to a GPS receiver, or to connect
to a Bluetooth-enabled printer.
The New Outgoing Port menu command is
available only if one or more Bluetooth-connected
devices support serial (COM) connections.
1. Ensure that your Toshiba phone is currently
connected to the other device via Bluetooth.
2. From the
Today screen, tap Start > Settings
> Connections tab > Bluetooth > COM
Ports tab > New Outgoing Port.
3. Tap the device you want to add, and tap
Next.
4. Tap a numbered COM port from the list.
5. To use this COM port to communicate only with
devices with which your Toshiba phone has a
Bluetooth partnership, check the Secure
Connection box.
6. Tap
Finish.
Beams
The term ‘beam’ is used to describe the short range
transfer of data between two devices via a
Bluetooth connection.
Beaming an item
To beam Calendar, Contacts, Notes, Tasks, and
Pictures & Videos files and data to other devices
using Bluetooth:
1. Tap the item you want to beam, such as an
appointment in Calendar, a task in Tasks, a
contact in Contacts, or a picture in Pictures &
Videos.
2. Tap
Menu > Beam Appointment. If you are
beaming a contact, tap Menu > Send Contact >
Beam.
3. Tap the device to which you want to send the
data to send.
Configuring your Toshiba phone to