Pioneer DVR-541H-S - Manual (Page 20)

Connecting up 02
20
En
Connecting to an AV
amplifier or receiver
To enjoy multichannel surround sound you
need to connect this recorder to an AV amp/
receiver using the digital coaxial output. In
addition to the digital connection, we
recommend also connecting using the
stereo analog connection.
You’ll probably also want to connect a video
output to your AV amp/receiver. Use the
standard (composite) video output (as
shown here), or the S-video or component
video connections.
See also Audio Out on page 113 for how to
set up the digital audio output. (Noise may
be output from your speakers if the recorder
is not set up to work with your AV amp/
receiver.)
Important
• Do not connect this recorder to your TV
‘through’ your VCR or other component
using A/V cables. Always connect it
directly to your TV.
1 Connect RF antenna cables as shown.
This enables you to watch and record TV
channels.
2 Connect the AUDIO and VIDEO
OUTPUT jacks (1 or 2) on this recorder to
a set of audio/video inputs on your AV
amp/receiver.
3 Use an optical digital audio cable (not
supplied) to connect the COAXIAL
DIGITAL OUT jack on this recorder to an
coaxial digital input on your AV amp/
receiver.
This enables you to listen to multichannel
surround sound.
1
4 Connect the AV amp/receiver’s video
output to a video input on your TV.
Note
1 If your AV amp/receiver doesn’t have an coaxial digital input, but has a optical type, converter boxes that convert
from coaxial to optical are available at specialist audio dealers.
AC IN
S-VIDEO VIDEO AUDIO
L R
OUTPUT 2
COMPONENT VIDEO OUT
Y
P B
P R ANTENNA
IN
OUT
COAXIAL IN
CONTROL DIGITAL OUT
OUTPUT 1
VIDEO AUDIO
L R
INPUT 3
OUTPUT 1 INPUT 1/AUTO START REC
S-VIDEO
ANTENNA
IN
ANTENNA
OUT
ANTENNA
IN (RF IN)
VIDEO
IN
VIDEO
OUT
AUDIO/VIDEO
INPUT
DIGITAL IN
COAXIAL
2
4
1
3
Antenna/cable TV
wall outlet
1
AV amp/
receiver
TV
DVR640H_RLT_EN.book 20 ページ ２００６年４月１１日 火曜日 午後１２時２６分