Pioneer DVR-541H-S - Manual (Page 29)

Getting started 04
29
En
• You can go back to the previous screen
at anytime in the Setup Navigator by
pressing
RETURN .
• Select your country.
• Auto-tuning channels
The Auto Scan option automatically scans
and sets the channel presets.
6 Select ‘Auto’ for automatic
time setting, or ‘Manual’ to set the clock
manually.
• Auto clock setting
Some TV channels broadcast time
signals together with the program. This
recorder can use these signals to set the
clock automatically.
Set ‘Clock Set CH‘ to the channel
preset number that broadcasts a time
signal, then move the cursor down to
‘Start’ and press ENTER.
The recorder takes a short while to set
the time. After you see that it’s set, select
Next to proceed.
If the time could not be set
automatically, press
RETURN to go back
to the previous screen and select
Manual .
• Manual clock setting
If no stations in your area are
broadcasting time signals, you can set
the clock manually.
Use the / buttons to set your
time zone.
You can set this by selecting a city or a
time relative to GMT.
Press then use the / buttons to
select ‘On’ or ‘Off’ for summer time,
then press ENTER.
Select On if you are currently using
summer time.
ENTER
k Setting
Line System
er Save
k Setting
t Line System
er Save
P
Country Selection
Country Singapore
Tuning
32/99
Cancel
ENTER
k Setting
Line System
er Save
P
Clock Setting
Auto
Manual
Auto
k Setting
Line System
er Save
P
p Navigator p Navigator
Auto Clock Setting
Date
Time
Clock Set CH
– – / – – / – – – –
– – : – –
P r 1
S t a r t
k Setting
Line System
er Save
P
p Navigator p Navigator
Auto Clock Setting
Date
Time
Clock Set CH
S U N 0 1 / 0 1 / 2 0 0 6
1 1 : 2 0
P r 1
S t a r t
N e x t
k Setting
Line System
er Save
P
p Navigator p Navigator
Manual Clock Setting
Time Zone
Summer Time O f f
Singapore
Singapore
1/2
k Setting
Line System
er Save
P
p Navigator p Navigator
Manual Clock Setting
Time Zone
Summer Time O n
Singapore
Singapore
1/2
DVR640H_RLT_EN.book 29 ページ ２００６年４月１１日 火曜日 午後１２時２６分