Pioneer DVR-541H-S - Manual (Page 44)

Recording 05
44
En
Canceling or extending the timer
1 Press and hold for three seconds
during a timer recording.
Recording continues, but the timer indicator
disappears from the front panel display
indicating that the timer has been canceled.
2 Press repeatedly to extend
recording in 30 minute blocks.
Programming a new end time
You can edit the end time of a timer
recording you have previously set.
1 Select ‘Timer Recording’ then
‘Timer Recording’ from the Home Menu.
2 Highlight the timer recording
you want to change.
3 Press then select ‘Modify’
from the command menu panel.
Alternatively, press
ENTER.
The Timer Program Set screen appears, from
which you can edit the settings.
4 Edit the end time as
necessary.
You can also edit the
Extend time
parameter.
5 Select ‘Store Program’.
6 Press to exit the Timer Recording
screen.
Stopping a timer recording
1 Press during a timer recording.
2 Select ‘Yes’ to confirm.
Preventing use of the recorder
before a timer recording (child
lock)
You can make all the front panel and remote
control buttons inoperative using the child
lock feature. This is useful when you set a
timer recording and want to make sure that
the timer settings are not changed before
recording has finished.
1 If the recorder is on, switch it
into standby.
2 [Front panel] Press and hold for
three seconds to lock the controls.
The front panel display briefly shows
LOCK.
If any buttons are pressed on the remote or
front panel,
LOCK is briefly displayed again.
• To unlock the recorder, press and hold
STOP on the front panel (while the
recorder is stopped) for three seconds
until the display shows
UNLOCK.
REC
ì
REC
ì
HOME
MENU
ENTER
ENTER
ENTER
HOME
MENU
STOP REC
ENTER
STANDBY/ON
05 Recording.fm 44 ページ ２００６年４月１３日 木曜日 午前８時３２分