Profile JTP18BABB User Manual

Jtp18babb - ge profile, 30" single wall oven, Undercounter installation (in inches)

Advertising
background image

Specification Revised 6/99

TM

JTP18BABB - GE Profile

30" Single Wall Oven

5

24

25

Gas or electric cooktops may be installed over
this oven. See cooktop installation instructions
for cutout size. See label on top of oven for
approved cooktop models.

Gas and electrical connections for
gas cooktop must be located in an
adjacent accessible location to the right.
For a 36" gas cooktop, the connections
may be made to the left.

120 Volt
Outlet

Gas
connection

Junction box
location
240/208V

36'' MIN.

4'' To 4-1/2 '' Toe kick allowable

Match toe kick height
front and two sides

22'' MIN. above
support platform

Top and/or side
fillers may be
necessary if unit
is positioned
between
existing cabinets

28-1/2'' MIN.
28-5/8'' MAX.

27-1/4'' MIN.
27-5/16'' MAX.
Cutout height

3/4'' Support
platform required

23-1/2" MIN.
Cutout depth

Allow 11/16''
overlap over side
edges of cutout

1-1/2"
Countertop

Note: Oven is rated for use only under the following cooktops:
• GE 30" and 36" electric coil and CleanDesign cooktops (Excluding Induction)
• GE 30" and 36" gas standard and sealed burner cooktops

Note: Gas or electric cooktops may be installed over this oven. See cooktop installation
instructions for cutout size. See label on back of oven for approved cooktop models.

Installation Information: Before installing, consult installation instructions [Pub. No. 31-10125]
packed with product for current dimensional data and for alternate installation options.

Undercounter Installation (in inches)

5-9/16"

Reference dim. for

MAX. support height

with typical 36" countertop

height

36" Typical
Countertop height

Power cord

Reference
5-9/16

30-7/16

Free space

1-1/2" MIN.

1-1/2" Typical countertop

Side View

22

27-5/16" MAX.

Cutout height

27-1/4" MIN.

Junction box(s) for

oven & radiant

cooktop 22" from

floor

Add suitable filler

to match adjacent

cabinets when needed

to maintain toe kick

alignment

This installation is to achieve minimum gap between bottom of countertop and control panel.
Note: For this installation, the bottom trim will not be flush with a typical 4" toe kick.

Optional Custom Installation for 30" CleanDesign
(Excluding Induction) or Sealed Burner Gas Cooktop (in inches)

Note: Cabinets installed adjacent to wall ovens must have an adhesion spec
of at least 194°

R

Listed by
Underwriters
Laboratories

For answers to your Monogram,

®

GE Profile Performance Series,

GE Profile

or GE appliance questions, call

GE Answer Center

®

service, 800.626.2000.

Advertising