Pioneer RS-D7R - Manual (Page 31)

Network menu <N.W.>
With this menu, you can make the following adjustments.
• Time alignment adjustment <T.A.> (Open state)
• Filter adjustment <FTR> (Open state)
• Switching between linear phase characteristics/minimum delay phase characteristics
(LIN) (Open state)
• Memory functions of adjusted network (Open state) (Refer to page 42.)
Switching to the network menu
• Press the MENU button and select the network menu (refer to page 11).
After the title screen, the display switches to the operation screen of the network menu.
Opening and closing the cover of the remote control (refer to page 5) switches between the
open and closed states of the menu display and setting screen.
• To cancel the network menu, press the BAND button.
If adjustments are difficult
• Adjusting the network requires technical skills and knowledge of the amplifiers and speakers
installed in the system. Consult your dealer from which the products were purchased if adjustments
are difficult.
• When adjustments have already been made at your dealer, the optimum setup for vehicle’s
particular interior has already been installed in the memory. In this case, recall the corresponding
memory for use (refer to page 45).
When completing the adjustment
• It is recommended that adjustment settings be stored in memory soon after the adjustments are
completed. Refer to page 42 for memory operations.
• After completing the network adjustments, adjust the overall balance of the sound image by using
the position fine tuning function of the main menu as necessary (refer to page 16).
31
ENG/MASTER 96
31
Audio Adjustment <Network>