Pioneer DVD Navigation Unit AVIC-80DVD - Manual (Page 132)

130
DVD
The following explains how to use Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400) to
control a DVD, which is sold separately. For details of DVD player or Muti-DVD player opera-
tion/features, see your product’s manual.
➲
This cannot be used unless AV Head Unit is combined and the source unit is connected by
IP-BUS.
➲
In case of using the build-in DVD player of AVIC-9DVD, see the “Operation manual” of
AVIC-9DVD.
➲
In case of using the build-in DVD player of AVIC-90DVD, see “Hardware manual” of AVIC-
90DVD.
➲
You cannot play DVD-Video with the built-in DVD-ROM drive of AVIC-80DVD.
➲
For other equipment, see “DVD Operation Reference Table” on page 177, table indicating
the differences of DVD operations, or the operation manual of that equipment.
➲
Read this chapter when you play CD or Video CD with the DVD player being combined.
Even when CD is played, the source will be set to DVD. (It will not indicate it as CD.)
TITLE
Shows the title number currently playing.
CHAPTER (or TRACK)
Shows the chapter number currently playing.
TIME
Shows the elapsed playing time of the current chapter (or track).
■How to watch DVD
1 Set a DVD (or CD) to DVD player.
Playback will automatically start.
The DVD disc’s menu may be displayed.
2 Use VOL dial to adjust the sound level.
Rotate to increase or decrease the volume.
3 To perform fast forward or reverse, press and hold control stick right or control stick
left.
4 To skip back or forward to another track, move the NEXT/PREV control to NEXT side
or PREV side.
Move the NEXT/PREV control to NEXT side skips to the start of the next chapter (or
track). Move the NEXT/PREV control to PREV side once skips to the start of the current
chapter (or track). Move again will skip to the previous track.
NAVI/AV
button
N/A
1 2 3
1
2
3