Pioneer DVD Navigation Unit AVIC-80DVD - Manual (Page 147)

145
Chapter
6
Combining and Using Pioneer A
V
Equipment
■Adjusting treble
You can adjust the cut-off frequency and the Treble level.
➲
In FRONT1 and FRONT2 modes, treble adjustment affects only the front output: rear output
cannot be adjusted.
1 Press
5 or ∞ to select “TREBLE” from the AUDIO MENU, and press A.MENU
(AUDIO) button.
2 Press
5 or ∞ to adjust the treble level.
Each press of
5 or ∞ increases or decreases the bass level. +6 - -6 is displayed as the
level is increased or decreased.
3 Select the desired frequency with
2 2 2 2 / 3 3 3 3.
2.5k - 4k - 6.3k - 10k (Hz)
■Adjusting loudness
Loudness compensates for deficiencies in the low- and high-sound ranges at low volume.
1 Press
5 or ∞ to select “LOUDNESS” from the AUDIO MENU, and press A.MENU
(AUDIO) button.
2 Press
5 to turn loudness on.
Loudness level (e.g., LOUDNESS:ON/MODE:MID) appears in the display.
3 Press
2 or 3 to select the level.
LOW - MID - HIGH
4 Press
∞ to turn loudness off.
■Using subwoofer output
Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400) is equipped with a subwoofer output
which can be switched on or off.
1 Press
5 or ∞ to select “SUB WOOFER” from the AUDIO MENU, and press A.MENU
(AUDIO) button.
When the subwoofer controller setting is S.W. CONTROL:EXTERNAL, you cannot
select SUB WOOFER.
2 Press
3 to turn subwoofer output on.
➲
You can turn off subwoofer output by pressing
2 2 2 2
. If you do not set to “ON”, you cannot
select “PHASE”, “LEVEL” or “FREQUENCY”.
3 Press
5 or ∞ to select the item you want to adjust.