Pioneer DVD Navigation Unit AVIC-80DVD - Manual (Page 81)

79
Chapter
4
Utilizing V
arious
Inf
ormation
■Storing the data of registered locations in the PC card
You can select any item registered in the Address Book and store the data in the PC card.
Data can be stored in the corresponding group. A new group can also be created. (However, if
nothing is registered in Registered Locations in Address Book, you cannot use this function.)
This section describes a method of creating a new group and storing the data of the registered
location into the group.
➲
The volume of data you can register depends on the capacity of the PC card.
1 Select “Settings” in the Main menu, then select “PC Card ” and “Save to PC Card”.
Click the OK button.
The list of locations registered in the Address Book appears.
2 Select the desired item for storage and click the OK button.
The selected item is checked. To register other locations, repeat this step.
Alternative option:
3 After finishing the selection of locations, select “OK” and click the OK button.
The list of the stored group appears.
4 Select “New Group” and click the OK button.
The display to enter a new group name appears.
➲
If the data is to be stored in a group already registered in the PC card, select the group
name in the list and click the OK button. (Up to 300 items per group can be registered.)
A message confirming that you want to store the data in the specified group appears.
Click the OK button, and the data is stored in the PC card, and a map of your surround-
ings then appears.
Select All : All the locations are selected at once.
Free space in the PC card
Number of groups you can store