Pioneer DVR-LX60D - Manual (Page 128)

The Initial Setup menu 16
128
En
EPG Type Select GUIDE Plus+ Use the Gemstar GUIDE Plus+ EPG.
Digital EPG Use the EPG based on information provided by D.TV
broadcasts.
Setup Navigator Start Select to start the Setup Navigator. See also
Switching on and setting up on page 30 .
Digital Tuner
Replace Channels Next Screen Scans for digital channels and replaces all the
channel presets with the results. Before the scan
starts you will need to select your country.
After the scan is complete the recorder tells you
whether any new channels were found, and if so,
how many.
(You can cancel the scan before it has finished by
pressing
HOME MENU or RETURN/EXIT . In this
case, no channels are set.)
If you execute a Replace Channels command, any timer recordings set for D.TV channels will be erased.
Add New Channels Next Screen Automatically scans for new digital channels.
After the scan is complete the recorder tells you
whether any new channels were found, and if so,
how many.
(You can cancel the scan before it has finished by
pressing
HOME MENU or RETURN/EXIT . In this
case, no new channels are set.)
Channel Sort Next Screen Use this screen to sort channel presets into your
prefered order. Use the
/ / / buttons to
highlight the channel you want to move, press
ENTER . Use the cursor buttons again to highlight the
position you want to move the channel preset to,
then press
ENTER again.
(If there are more channel presets than will fit on one
screen, you can select the next/previous page by
highlighting the small triangular marks and pressing
ENTER .)
Setting Options Explanation
DVRLX60D_WV_EN.book 128 ページ ２００７年３月２６日 月曜日 午後１２時１６分