Playback 08, Playing cds and wma/mp3 discs, Playing video cd/super vcds – Pioneer DVR-LX60D User Manual

Page 76

Advertising
background image

Playback

08

76

En

Playing CDs and WMA/MP3 discs

The table below shows the basic playback

controls for audio CDs

1

, and WMA/MP3

files.

Playing Video CD/Super VCDs

The table below shows the basic playback
controls for Video CD/Super VCDs.

Some discs feature Playback Control (PBC
for short) menus. These discs show PBC in
the display when you load them and display
a menu on-screen from where you can select

what to watch.

2

Press to skip to previous/next
chapter/title. (During playback
you can also use the front panel

CH +/–

buttons.)

During playback, enter a title
number then press

ENTER

to

skip directly to that title.
Press

CLEAR

to clear a number

entry and start again.

(Commercial back/skip)
Turn the

Smart Jog

counter-

clockwise for backward skip;
turn clockwise for forward skip.
You can search up to two hours
in either direction.

While paused, press and hold
to start slow-motion playback.
Press repeatedly to change the
playback speed.
While paused, press to advance
a single frame in either direc-
tion. You can also execute
frame-by-frame playback/back-
ward scanning via the

Smart Jog

.

Note

1 If you want to play a DTS audio CD, make sure the recorder is connected to a DTS-compatible amp/receiver with

a digital connection. Noise will be output through the analog outputs. Also make sure that

STEREO

is selected

using the

AUDIO

button (see

Switching audio channels

on page 83).

Press to start playback.

Press to stop playback.

Pauses playback, or restarts
playback when paused.

PREV

NEXT

CLEAR

CLEAR

ENTER

CM SKIP

CM BACK

/

/

STOP

PAUSE

Except WMA:

Press to start

scanning. Press again to
increase the scanning speed.
(There are two scan speeds; the
current scan speed is shown
on-screen.)

Press to skip to previous/next
track (or folder for WMA/MP3
disc). (During playback you can
also use the front panel

CH +/–

buttons.)

During playback, enter a track
number then press

ENTER

to

skip directly to that track.
Press

CLEAR

to clear a number

entry and start again.

Press to start playback.

Video CD only:

If

RESUME

is dis-

played on-screen, playback
starts from the place last
stopped.

Press to stop playback.

Video CD only:

You can resume

playback from the same point
by pressing

PLAY

. (Press

STOP

again to cancel the

resume function.)

2 When playing in PBC mode, some playback features, such as search, repeat and programme play are not

available. You can play a PBC Video CD/Super VCD in non-PBC mode by starting playback using the Disc
Navigator (see

Using the Disc Navigator with playback-only discs

on page 79).

PREV

NEXT

CLEAR

CLEAR

ENTER

STOP

DVRLX60D_WV_EN.book 76 ページ 2007年3月26日 月曜日 午後12時16分

Advertising