Planet Technology FGSW-2624SF - Manual (Page 40)

- 40 -
4.7 QoS Configuration
This function provides QoS Configuration of Web Smart Switch, the screen in Figure 4-42 appears and table 4-4 de-
scriptions the QoS Configuration of Web Smart Switch.
Figure 4-42 QoS Configuration Web Page screen
Table 4-4 Descriptions of the QoS Configuration screen Objects
Object Description
QoS Mode Provide different modes for QoS Configuration, the available options are shown as below:
Disable QoS Priority,
High Empty Then Low,
Highest:secHigh:SecLow:Lowest=8:4:2:1
Highest:secHigh:SecLow:Lowest=15:7:3:1
Highest:secHigh:SecLow:Lowest=15:10:5:1
Default mode is Highest:secHigh:SecLow:Lowest=8:4:2:1, the screen in Figure 4-43 ap-
pears.
Static Port Ingress
Priority Allow to assign Ingress priority on each port of Web Smart Switch, the available options are
OFF
and 0-7. Default mode is 0 and the screen in Figure 4-44 appears.
802.1p Priority [7-0] Allow assign high and low on each priority, the available options are shown as below:
Lowest, SecLow, SecHigh, Highest,
the screen in Figure 4-45 appears.
Apply button Press this button for save current QoS configuration of each port on Web Smart Switch.