View information of the photoframe, Reset all settings to factory default – Philips SPF4608 User Manual
Page 29
Advertising
27
EN
View information of the
PhotoFrame
<RXFDQÀQGWKHPRGHOQDPHWKHÀUPZDUH
version of the PhotoFrame, and the memory
status of the PhotoFrame and other storage
device available on the PhotoFrame.
1
In the home screen, select [Settings] and
then press OK.
2
Select [Info].
»
The information of the PhotoFrame is
displayed on the screen.
Reset all settings to factory
default
1
In the home screen, select [Settings] and
then press OK.
2
Select [Default Settings], and then press
OK.
3
Select [Yes], and then press OK.
»
$FRQÀUPDWLRQPHVVDJHLVGLVSOD\HG
4
Select [Yes], and then press OK.
»
All settings on the PhotoFrame are set
to factory default.
To cancel the operation, select [No] in the
prompt message and then press OK.
Advertising
This manual is related to the following products: