PYLE Audio IKON RUGGED 7505-BT - Manual (Page 245)

Chapter 6: Settings
Tools Menu
Ikôn Rugged PDA (Windows Mobile 6.1) User Manual 231
• Advanced IP – The Advanced IP button in the Show Profile and Edit Profile dialog
boxes opens another dialog box that allows you to configure a static IP address as well
as the IP addresses for the primary and secondary DNS and WINS resolvers.
6.44.5.2 Security Configuration
The Security Configuration dialog box is called up through the Tools menu.
The Security Configuration dialog box allows you to enable, disable and change the PIN.
You will need the current PIN to make any of these changes. The PIN must be enabled in
order to be changed. (If the PIN is disabled, the New PIN entry field is greyed out.)
The Require PIN on resume checkbox is independent of the aforementioned settings. By de-
fault, this checkbox is unchecked. While the checkbox remains unchecked, any PIN entered
on startup or through the Security Configuration dialog box and submitted successfully to
the modem is stored in memory for as long as the device is not rebooted. This stored PIN is
then used without further user interaction whenever the modem requires a PIN (such as
resume after suspend or modem removal). The stored PIN is also automatically entered in
the Current PIN text box whenever the Security Configuration dialog box is called up.
Note: Security configuration is not available with CDMA modems.
Note: Keep in mind that some network operators do not allow the SIM PIN to be dis-
abled. A new PIN must consist of 4 to 8 numeric digits.