PYLE Audio IKON RUGGED 7505-BT User Manual
Page 281
Chapter 7: Peripheral Devices & Accessories
Vehicle Cradle Mounting Recommendations
Ikôn Rugged PDA (Windows Mobile 6.1) User Manual
267
2. Install cradles so as not to obstruct vehicle safety features, i.e. air bags, seat
belts, etc.
3. Ensure cradle is secured to the vehicle in a safe location. Injury may result
otherwise.
4. Ensure the mounting has the capacity to hold the cradle and the Ikôn. Cradle plus
Ikôn weight is approximately 1kg (2.2 lb.).
5. Psion Teklogix has recommended and approved mounts. Consult Psion Teklogix
Customer Service for direction.
Figure 7.10 Removing The RAM Mount
To accommodate the service loop of the power cable, leave a 10.2 cm (4 in.) clearance at the
bottom of the vehicle cradle. Leave a 17.8 cm (7 in.) clearance at the top of the vehicle
cradle to allow easy removal of the Ikôn. When selecting a mounting location, refer to the
detailed assembly instructions that are packaged with the pedestal.
If you choose to use a third party company-produced cradle, Psion Teklogix cannot take re-
sponsibility for the effects of that third party product when it causes failure to our device.
Important: Before Psion Teklogix releases a product, our engineering team exposes
that product to vibration tests to ensure the Ikôn will remain secure during
normal use. But as a low cost mount, the cradle will not defend against
shock if the vehicle undergoes a front or rear impact. Take care to mount
the cradle in an upright position in case of accidents.