Operating environment, Condiciones de funcionamiento – Pioneer DJM-300 User Manual

Page 2

Advertising
background image

2

<DRB1316>
En/Sp

Operating Environment

H045 En

Operating environment temperature and humidity:
+5˚C – +35˚C (+41˚F – +95˚F); less than 85%RH (cooling vents not
blocked)
Do not install in the following locations
÷ Location exposed to direct sunlight or strong artificial light

÷ Location exposed to high humidity, or poorly ventilated location

VENTILATION:

When installing this unit, make sure to leave

space around the unit for ventilation to improve heat radiation
(at least 5 cm at rear, and 3 cm at each side).

WARNING:

Slot and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the product and
to protect it from overheating, to prevent fire hazard, the open-
ings should never be blocked and covered with items, such as
newspapers, table-cloths, curtains, etc. Also do not put the ap-
paratus on the thick carpet, bed, sofa, or fabric having a thick
pile.

Condiciones de Funcionamiento

H045 Sp

Temperatura y humedad ambiental durante el funcionamiento:
+5˚C – +35˚C (+41˚F – +95˚F); menos de 85%RH (aperturas de
aireación no obstruidas)
No instalar en los siguientes lugares:
÷ lugar expuesto a la luz directa del sol o a fuerte luz artificial

÷ lugar expuesto a alta humedad, o lugar poco aireado

VENTILACION:

Cuando se instala esta unidad, asegúrese de

dejar espacio alrededor de la unidad para proporcionar
ventilación y mejorar así la radiación del calor (por lo menos 5
cm en la parte trasera y 3 cm de cada lado).

ADVERTENCIA:

Las rendijas en el aparato es necesario para la

ventilacíon para permitir el funcionamento del producto y para
proteger este de sobrecalentamiento, para evitar incendio. Las
rendijas no deberían ser nunca cubiertas con objectos, como
periódicos, manteles, tiendas, etc. Tambiém no poner el aparato
sobre alfombra espesa, cama, sofá o construción de pila espesa.

Advertising