Remote operation, Other remote operations, Erasing a specific message – Panasonic KX-FP121AL User Manual

Page 104: Erasing all messages, Monitoring the room, Recording a marker message, Re-recording a greeting message

Advertising
background image

104

Remote Operation

(KX-FP121/KX-FM131 only)

The message has been erased.

Erasing incoming messages from memory

Erasing a specific message

Press

while listening to the message you want to

erase.

A long beep and the voice guide will be heard.
The unit will then continue with the next message.

Erasing all messages

Press

to erase all messages.

A long beep and the voice guide will be heard.

5

4

Voice guide example:

All messages have been erased.

All messages have been played.

1. Wait for the voice guide to tell you that the remote

operation has ended.

2. Wait about 10 seconds for the voice guide to prompt

you to leave a message.

3. Leave a message after the beep.

Please leave your name and message
after the beep.

Other remote operations

Monitoring the room

Press

to monitor the sound in the room where the

unit is installed.

You can monitor the room sound for about 30 seconds.

After 30 seconds, a beep sounds. To continue
monitoring, press

again within 10 seconds.

6

6

Recording a marker message

After playing back the recorded messages, you can leave
an additional message.

Re-recording a greeting message

You can change the contents of the greeting message for
the TAD/FAX mode.

1. Press

to start recording.

A long beep will sound.

2. Speak clearly up to 16 seconds.

If you pause for over 2 seconds, 6 beeps will sound
and the recording will stop. Repeat from step 1
within 10 seconds.

3. When finished, press

.

The new greeting message will be played.

9

7

Advertising
This manual is related to the following products: