Panasonic KX-FP121AL - Manual (Page 59)

59
Sending Faxes
Fax/Copy
Multiple stations
This feature is useful for sending the same document to selected parties whose telephone numbers are stored
in the One-Touch Dial or EASY DIAL directory. You must program the desired parties into one of the
BROADCAST keys (One-Touch Dial keys 1, 2 or 3).
Important:
● Before programming, make sure that the desired telephone numbers have been stored into the One-Touch
Dial or EASY DIAL directory.
● The BROADCAST keys can be used as One-Touch Dial keys 1, 2 or 3 or as broadcast keys.
These functions cannot be used at the same time.
1 Press .
Display:
2 Press one of the keys.
3 Press or to select “BROADCAST”.
Example:
4 Press .
5 Enter the station.
a: Using the One-Touch Dial:
For stations 1–3 which are not used as
keys, press the preset
One-Touch Dial key.
For stations 4–6, press
, then press
the preset One-Touch Dial key.
Example:
b: Using the EASY DIAL directory:
Rotate until the desired name is
displayed.
Example:
Press .
Example:
● To enter other stations, repeat this step (up to
20 stations).
DIR=Glen [002]
START/SET/COPY
Glen [001]
EASY DIAL
DIR=Margy [001]
LOWER
BROADCAST
DIR= [000]
START/SET/COPY
BROADCAST 1 ▼▲
DIAL MODE ▼▲
BROADCAST
USE EASY DIAL
PRESS STATION
DIRECTORY PROGRAM
1 2 3
4 5 6
7 8 9
0
START/SET/COPY
/
One-Touch Dial keys
DIRECTORY PROGRAM
LOWER
STOP
BROADCAST
/
EASY DIAL
Programming the BROADCAST keys with telephone numbers
6 Press after entering
all of the desired stations.
● To program another BROADCAST key,
repeat steps 2 to 6.
7 Press to exit
the program.
DIRECTORY PROGRAM
USE EASY DIAL
PRESS STATION
REGISTERED
START/SET/COPY
Note:
● If you make a mistake while programming,
press
, then make the correction.
● Confirm the stored numbers by printing a
broadcast list (p. 127).
STOP