Cmgs, send sm to network, Cmgs, send sm to network -110, Cmgs parameters -110 – PIONEERPOS AT Commands G24-LC User Manual
Page 174
SMS
3-110
G24-L AT Commands Reference Manual
April 15, 2008
+CMGS, Send SM to Network
This command sends an SM from the G24-L to the network. The message reference value <mr>
is returned to the G24-L upon successful delivery of the message.
Note:
The DCD signal will be in ON state while text is entered.
The header parameters in TEXT mode will be set according to CSMP settings.
The following table shows the +CMGS parameters.
Example
AT+CMGS="064593042",129
>This is the message body <CTRL+Z> //<CTRL+Z> ends the prompt text mode and returns to
regular AT command mode
OK
AT+CMGF=0
OK
AT+CMGS=24
>079179521201009511FF0B917962543940F20008001400410042004300440045 <CTRL+Z>
+CMGS: 128
OK
Note:
Any character sent by TE to G24-L before G24-L has reported a result of AT+CMGS
operation, will abort AT+CMGS command execution. However, if SMS was already sent
to network and sending operation was successful, the result of operation "+CMGS <mr>"
will be reported by G24-L.
A flex dependant enhancement enables the reporting of numeric error code to TE, in case
the sending operation has failed. The numeric error code will be reported in format:
"+CMGS ERROR: <err>".
Command Type
Syntax
Response/Action
Remarks
Set
If text mode (+CMGF=1):
+CMGS=<da>[,<toda>]<CR>
text is entered<ctrl-Z/ESC>
If PDU mode (+CMGF=0):
+CMGS=<length><CR>
PDU is entered<ctrl-Z/ESC>
+CMGS: <mr>
+CMS ERROR: <err>
The Set command
validates the input
parameters, sends the
SM to network and
reports the result of
the operation to the
G24-L.
Table 3-70: +CMGS Parameters
<Parameter>
Description
<da>
Destination address in quoted string. This field contains a single MIN number.
<toda>
Type of DA. Value between 128-255 (according to GSM 03.40, 9.1.2.5). If this field is
not given and first character of <da> is '+' , <toda> will be 145, otherwise 129.
<length>
Size of message in PDU mode format, in octets, excluding SMSC data.
<mr>
Sent message reference number.
PDU
Message header and contents in PDU mode format. See description in +CMGW
section.