Y, default user profile, Y, default user profile -224, Y parameters -224 – PIONEERPOS AT Commands G24-LC User Manual
Page 288
Advertising
UI (User Interface)
3-224
G24-L AT Commands Reference Manual
April 15, 2008
&Y, Default User Profile
The following table shows the &Y parameters.
Example
AT&Y0
OK
AT&Y1
OK
Command
Type
Syntax
Response/Action
Set
&Y<n>
OK
or:
+CME ERROR: <err>
Table 3-147: &Y Parameters
<Parameter>
Description
<n>
User’s profile number:
0
Selects power-up configuration to user’s profile 0
1
Selects power-up configuration to user’s profile 1
The default value is 0.
Advertising
This manual is related to the following products: