Pioneer BDR-203 - Manual (Page 10)

BDR-203/BDC-203 Command Reference Manual Version 0.90
Page 9
4.3 FORMAT UNIT Command
The CmpLst bit is supported only in DVD-RAM media, must be set to zero with other medias.
The Interleave Value field is not supported and must be set to zero.
The Format Code field allows the value of 001b and 111b. If Format Code field is set to 001b and a BD-RE/R media is mounted,
the drive confirms for the definition of Blu-ray Disc(BD) Multi-Media Command Set Description. If Format Code field is set to
001b and a CD-RW/DVD-RW/DVD-RAM media is mounted, the drive conforms for the definition of SFFC INF-8090i. If
Format Code is set to 001b and a +RW media is mounted, the drive conform for the definition of MMC-5. If Format Code is set
to 111b and CD-RW media is mounted, the drive conforms for legacy specifications which are described in the definition of
MMC-5.
The drive supports following Format Type for each media.
Table 4 - Format Type
Format
Type
Name
Support for
BD-RE
media
Support for
BD-R
media
Support for
CD-RW
media
Support for
DVD-RW
media
Support for
DVD-RAM
media
Support for
+RW media
00h Full Format Yes Yes Yes Yes Yes -
01h Spare Area Expansion - - - Yes -
10h C/DVD-RW Full Format - - Yes Yes - -
13h
DVD-RW Quick Grow the
last Border - - -
Yes
-
-
15h DVD-RW Quick - - - Yes - -
26h DVD+RW Basic Format - - - - - Yes
30h Format with Spare Area Yes - - - - -
31h Format without Spare Area Yes - - - - -
32h Format BD-R with Spare Area - Yes - - -
Table 5 - Format Code = 111b (CD-RW only)
Sess bit Grow bit Support for CD-RW media
0 0 Yes
0 1 No
1 0 No
1 1 No
The Format Unit parameter list shall be transferred from the Host to the drive. The data sent to the drive consists of a Format List
Header, followed by one Format descriptor, so the parameter list length is always 12 bytes. When the Format Options Valid
(FOV) bit in the Format List Header is set to one, the DPRY, DCRT, STPF, IP, Try-out, and VS shall be set to zero. In this case,
the format operation is performed with an Immed function specified by the Immed bit. When the FOV bit is set to zero, the
DPRY, DCRT, STPF, IP, Try-out, Immed, and VS shall be set to zero. In this case, the format operation is performed with the
drive’s internal default setting. The default setting of Immed function is one. Even if the format operation is requested with the
FOV bit set to one, the drive’s default setting itself will not be changed.
4.3.1 Format Code = 001b
4.3.1.1 Format Type = 00h (Full Forma for C/DVD-RW / Default Format for BD-RE/R)
4.3.1.1.1 On DVD-RAM media
The defect list handling is specified by the combination of the CmpLst bit and the DCRT bit. In the case that the CmpLst bit is
set to zero and the DCRT bit is set to one, the Number of Blocks field shall be ignored and the number of addressable blocks
shall be retained. In other cases, the Number of Blocks field specifies the number of addressable blocks for the whole disc and
the Type Dependent Parameter field specifies the Block Length. Neither field is changeable from the values reported by READ
FORMAT CAPACITIES command.
The defect list handling is decided by the following combinations.
Table 6 – DVD-RAM Defect List Handling
PDL
CmpLst DCRT Certification
P-list G1-list G2-list
SDL Remarks
0 0 yes preserved
new form
Certification
disposed disposed slow initialization
1 1 no preserved preserved disposed disposed
Return to original
slipping at the latest
certification. quickly
Pioneer
Confidential