Pioneer BDR-203 - Manual (Page 30)

BDR-203/BDC-203 Command Reference Manual Version 0.90
Page 29
4.6.2.3 Write Speed Data for BD Media
Table 27 – Write Speed Data for BD Media
Disc
Write Speed
Descriptor #
End LBA Read Speed Write Speed
#1
BD 8x CLV
8*4495 = 35960 (8C78h) BD 8x CLV
8*4495 = 35960 (8C78h)
#2
BD 6x CLV
6*4495 = 26970 (695Ah) BD 6x CLV
6*4495 = 26970 (695Ah)
#3
BD 4x CLV
4*4495 = 17980 (463Ch) BD 4x CLV
4*4495 = 17980 (463Ch)
BD-R SL/DL
Z-CLV Writing
#4
BD 2x CLV
2*4495 = 8990 (231Eh) BD 2x CLV
2*4495 = 8990 (231Eh)
BD-RE SL/DL #1
Outermost Lead-out
Start LBA in ADIP - 1
BD 2x CLV
2*4495 = 8990 (231Eh) BD 2x CLV
2*4495 = 8990 (231Eh)
4.7 INQUIRY Command
CmdDt bit, EVPD bit and Page Code or Operation Code field does not supported. These bit or field must be set to 0.
The drive returns following 96bytes Inquiry data.
Table 28 - INQUIRY Data Format
Bit
Byte
7 6 5 4 3 2 1 0
0 Reserved Peripheral Device Type (05h)
1 RMB (1) Reserved
2 ISO Version (0h) ECMA Version (0h) ANSI Version (0h)
3 ATAPI Transport Version(3h) Response Data Format(2h)
4 Additional Length (5Bh)
5 Reserved
6 Reserved
7 Reserved
8
15
Vendor Identification = “PIONEER “
16
31
Product Identification = ” BD-RW BDR-203“
32
35
Product Revision Level = “X.XX”
36 Reserved
37
46
Release Date = “YY/MM/DD”
47
55
Manufacture’s Information
56
95
Reserved
4.8 LOG SELECT Command
This command is used for checking the drive.
The specifications of this command are vendor unique.
4.9 LOG SENSE Command
This command is used for checking the drive.
The specifications of this command are vendor unique.
Pioneer
Confidential