Panasonic AG-HPX300P User Manual

Page 144

Advertising
background image

1

Chapter


Connecting

to

Exter

nal
De
vices

A TYPE S and P2 STORE hard disk drive allows you to write
back data in card units.
Format the P2 card to prepare for write back.

1



SwitchtotheUSBhostmode.

For details, refer to [Switching to USB Host Mode]
(page 140).

2



ConnectaharddiskdriveviaUSB.

3



InsertthePcardtowhichdatawillbewritten
backto.

4



PresstheTHUMBNAILbutton,selectHDD
EXPLOREfromthethumbnailmenu,moveto
thepartitionwiththedatathatwillbewritten
andpresstheSETbutton.

5



SelectOPERATIONIMPORTALLfrom
thethumbnailmenuandselectaslotwithan
emptyPcardforwritingto.

6



SelectYES.

• This starts the write process to the card.

• COPY COMPLETED! announces the end of the write

back process.

NOTE

• It is not possible to import data by the partition between P2

cards with different model numbers. Import data in clip units
from cards with a different model number.

• To turn off the verify phase in a write back operation, select

HDD SETUP in the thumbnail menu and set VERIFY to OFF.
This speeds up the write back time but does not verify the
written data.

• When a clip is written back to a P2 card it was not originally

on may make that clip an incomplete clip. Should this happen,
reconnect it.

Refer to [Reconnection of Incomplete Clips] (page 109).

Hard disk drive precautions

• Use hard disk drives (including P2 STORE (AJ-

PCS060G)) according to the following conditions.

- Operate hard disk drives within their operating

specifications (temperature, etc.).

- Do not use hard disk drives in locations that are

unstable or exposed to vibration.

• Some hard disk drives may not operate normally.
• SATA (serial ATA) or PATA (parallel ATA) interface hard

disk drives connected using a USB conversion cable may
not be recognized.

• Use hard disk drives with plenty of capacity for copying

data.

• During formatting and copying, do not disconnect cables

or remove a P2 card that is involved in these activities
and do not power off this camera and the hard disk drive,
as the camera and hard disk drive will otherwise have to
be rebooted.

• A hard disk drive is a precision instrument whose

read and write functions may fail in some operating
environments.

• Please note that Panasonic accepts no liability

whatsoever for data loss or other losses either direct or
indirect arising from hard disk damage or other defects.

• When data from this camera is copied to a hard disk and

is edited on another computer, the data may no longer
work in this unit and the hard disk data may become
corrupted.

• Use of the drive mount converter distributed by the below

URL allows you to mount specific folders when a hard
disk drive is connected.

https://eww.pavc.panasonic.co.jp/pro-av/

Advertising