Audio (input) function section – Panasonic AG-HPX300P User Manual

Page 16

Advertising
background image

1

Chapter


P

ar

ts

and
their

Functions

Audio (input) Function Section

1

6

2

7

3

5

4

8

1 MIC IN (microphone input) jack (XLR, 3-pin)

• Connect a microphone (optional accessory) to this

jack.

• A phantom-powered microphone may be connected.

To use a phantom-powered microphone, set the menu
option F.MIC POWER to ON in the AUDIO SETUP
screen.

For details, refer to [Preparing for Audio Input]
(page 95).

2 AUDIO LEVEL CH1/CH2 (audio channel 1/2

recording level adjustment) controls
• With the AUDIO SELECT CH1/CH2 switch positioned

to MAN, these controls can be used to adjust the
recording levels for audio channels 1 and 2.

• Note that the controls are designed to be locked. For

adjustment, each control must be depressed while
turning.

3 AUDIO SELECT CH1/CH2 (audio channel 1/2

automatic/manual level adjustment selector) switch
Use this switch to select recording level control mode
for Audio Channels 1 and 2.
AUTO:

Recording level automatically controlled.

MAN:

Recording level manually controlled.

For details, refer to [Adjusting Recording Levels]
(page 54)

4 AUDIO IN (audio input selector) switch

Use this switch to select signals recorded through
audio channels 1 – 4.
FRONT:

Records signals from a microphone

connected to the MIC IN jack.

W.L.(WIRELESS):

Records signals from a wireless receiver.

REAR:

Records signals from audio devices or

microphones connected to the AUDIO IN
CH1/CH2 connectors.

NOTE

To record 2-channel wireless input, switch both CH1 and
CH2 to W.L. position and set the menu option WIRELESS
TYPE in the AUDIO SETUP screen to DUAL.

5 AUDIO IN CH1/CH2 (audio channel 1/2) connectors

(XLR, 3-pin)
Audio devices or microphones may be connected here.

For details, refer to [When Using Audio Devices]

(page 96).

6 LINE/MIC/+48V (line input/mic input/mic input +48V)

selector switch
Use to select audio signals input to the AUDIO IN CH1/

CH2 connectors.
LINE:

Line input for audio signals input from an

audio device

MIC:

Audio signal input from microphone with

internal power supply (the camera does not

supply power to a phantom microphone).

+ 48V:

Audio signal input from a microphone that

requires an external power supply (The

camera supplies power to a phantom

microphone).

NOTE

Power is supplied when the menu option
R.MICPOWER in the AUDIO SETUP screen is
set to ON.

7 FRONT AUDIO LEVEL (audio recording level

adjustment) control
• This control adjusts the recording level of audio

channels 1 and 2.

• With the AUDIO SELECT CH1/CH2 switch positioned

to MAN, this control can be used to adjust the

recording levels for audio channels 1 and 2.

• Use the menu options FRONT VR CH1 and FRONT

VR CH2 in the AUDIO SETUP screen to select the

input connector this control will be used for.

8 Wireless slot

A Unislot wireless receiver (optional accessory) may be

attached here.

Advertising