Panasonic AG-HPX300P - Manual (Page 53)


Chapter

Adjustments
and
Settings
for
Recording
Assigning functions to USER buttons
The USER MAIN, USER1, and USER2 buttons can be
assigned user-selected functions.
Use the menu options USER MAIN, USER1, and USER2 to
assign functions to respective button. Select these items
from the setting menu SW MODE screen.
PUSH MENU TO RETURN
MID GAIN
HIGH GAIN
ATW
ATW TYPE
W.BAL.PERSET
USER MAIN
0dB
6dB
12dB
OFF
1
USER1 BACKLIGHT
3.2K
Y GET
LOW GAIN
SW MODE
Selectable Functions
• REC REVIEW:
Assigns REC REVIEW.
• SPOTLIGHT:
Assigns auto iris control on/off for spotlight.
• BACKLIGHT:
Assigns auto iris control on/off for backlight
compensation.
• ATW:
Turns the ATW function on or off.
• ATW LOCK:
Pressing this lock during ATW operation locks
the white balance. Press again to start the ATW
function again.
• GAIN:24 dB:
Assigns a function that raises gain by 24 dB.
• Y GET:
Assigns a function that displays the brightness
level at the center of the image.
• DRS:
Assigns a function that stretches the dynamic
range. A function that magnifies the dynamic
range by compressing the video level in high-
brightness areas.
• TEXT MEMO:
Assigns text memory recording.
• SLOT SEL:
Assigns P2 card slot selection.
• SHOT MARK:
Assigns the shot marker function.
• MAG A. LVL:
Assigns a function that magnifies the audio level
meter.
• PRE REC:
Assigns a function that turns the PRE REC
function on and off.
• PC MODE:
Assigns a function that switches the USB
device mode or the USB host mode on and off.
Switching the USB device mode and USB host
mode on and off is set by the menu option PC
MODE SELECT in the SYSTEM SETUP screen.
• WFM:
Assigns a function that switches WAVE FORM
display. The WAVE FORM display is selected
using the menu option WFM (page 128) in the
SW MODE screen.
 NOTE
The default settings are listed below.
• USER MAIN: Y GET
• USER1:
BACK LIGHT
• USER2: TEXT MEMO