Panasonic AG-HPX300P - Manual (Page 66)


Chapter

Adjustments
and
Settings
for
Recording
Screen displays
T C 1 2 : 3 4 : 5 6 : 2 3 1 1 2 9 9 9 min B 9 0 %
P 2 L A C K I - P A U S E U S E R - 1
1394
PROXY
C A C
1 0 8 0 i
AVC-I100
P 3 .2K
L T . B O X
0 dB
N D 1
8 3 % N D 1
F E B 2 5 2 0 0 8 2
S P O T
F 5 . 6
3 : 5 9 :
Z
5
9
9
9
6 0 : 2 4 P N D R S
1
2 = = = = = = = = 1/ 1 2 3 . 4 C H
C
H
13
26
14 15 12
23 24 25 1
2
3
4
6
10
11
8
9
7
5
16
17
18
19
20
21
22
1 Time code displays
Each press of the COUNTER button displays (or turns
off) the indications listed below.
• (No indication)
• Counter:
Counter value (during recording only)
• TC: Time code value
TC* is indicated when the time code value
cannot be correctly read from DVCPRO/DV
connector input.
The colon between the seconds and the
frames changes to a period ( . ) in drop
frame mode.
• tc: Time code value (frame digits are indicated
in 24/30 frames only)
tc* is indicated when the time code value
cannot be correctly read from DVCPRO/DV
connector input.
The colon between the seconds and the
frames changes to a period (.) in drop frame
mode.
• UB: User bit values
UB* is indicated when the user bit value
cannot be correctly read from DVCPRO/DV
connector input.
• FR: Frame rate information for recording
• FR60I -: 60i interlace mode (60 fields/s)
• FR60P -: 60P progressive mode (60 frames/s)
• FR30P -: 30P progressive mode (30 frames/s)
• FR24P *: 24P progressive mode (24 frames/s)
• FR24PA *: 24P advanced mode (24 frames/s)
*: In FR24P and FR24PA modes, the last digit contains
the frame conversion sequence information.
 NOTE
When TC, tc and UB are locked to TC IN input, the characters in
their icons change to outline characters TC 
TC .
When the HOLD button is used to temporarily freeze
indications, the HOLD indication blinks.
2 Warnings
•
P2
: Blinks when no P2 card is inserted or the
card is write protected.
•
P2 FULL:
Blinks when there is no more space left on
the P2 card.
•
P2 LACK:
Blinks in loop rec mode when there is not
enough space left on the P2 card.
• : Lights when the battery for the internal clock
is depleted.