Waveform monitor function – Panasonic AG-HPX300P User Manual

Page 77

Advertising
background image



Chapter


Adjustments

and
Settings

for

Recording

• When the camera-recorder is very cold, the video image

in the LCD monitor will appear slightly darker immediately
after the power is turned on. Once the interior of the camera-
recorder warms up, the LCD monitor delivers normal
brightness.

Self-portrait Shooting

When shooting with the LCD display angled 180 degrees
towards the lens, you can set the menu option SELF
SHOOT to MIRROR, to horizontally flip the video image on
the LCD display, and allow you to view a mirror image while
shooting.
Note that only the video image on the LCD monitor is
horizontally flipped, not the actual video being recorded.
This function clears any status display, waveform and
vectorscope display on the LCD monitor. Setting menus
and thumbnail displays are not flipped horizontally.

Waveform monitor function

Assign the WFM function to a user button and press that
user button to display a waveform for an image in the
LCD monitor. Another press of the WFM button closes the
waveform display.
• The menu option WFM (Page 128) in the SW MODE

screen allows you to switch between the waveform and
vectorscope displays.

• The waveform display does not appear in the viewfinder.
• The waveform display does not appear when the focus

assist function is used.

• The waveform display cannot be recorded.

Advertising