Panasonic AG-HPX300P - Manual (Page 80)

0
Chapter

Adjustments
and
Settings
for
Recording
Handling setup data
Configuration of setup data files
This camera makes it possible to save a scene file to each of the F1 to F6 positions on the SCENE FILE dial.
Use of an SD memory card makes it possible to save up to four of the F1 to F6 files on an SD card for later retrieval.
The setting menu values can be stored as a user file in the camera and up to four files can be stored on the SD memory
card.
The setting data files are configured as shown below.
F1 Default value
SCENE FILE
(Factory defaults)
SCENE FILE
screen INTIAL *1
SCENE FILE screen
LOAD/SAVE *1
F2 Default value
F3 Default value
F4 Default value
F5 Default value
F6 Default value
F1 Current value
SCENE FILE
(Current operating status values)
F1 Current value
F1 Current value
F1 Current value
F1 Current value
F1 Current value
F1 Saved value
SCENE FILE
(Saved camera values)
F1
F2
F3
F4
F5
F6
SCENE
FILE 1
F1
F2
F3
F4
F5
F6
SCENE
FILE 2
F1
F2
F3
F4
F5
F6
SCENE
FILE 3
F1
F2
F3
F4
F5
F6
SCENE
FILE 4
USER FILE1
USER FILE2
USER FILE3
USER FILE4
USER FILE initial value
USER FILE
(Factory defaults)
OTHER FUNCTIONS screen
USER FILE � INTIAL
OTHER FUNCTIONS screen
USER FILE � LOAD/SAVE
CARD FUNCTIONS screen
SCENE FILE � LOAD/SAVE *2
*1: SCENE FILE dial unit
*2: All files F1 to F6
Current USER FILE values
USER FILE
(Current operating status values)
Saved USER FILE values
USER FILE
(Saved camera values)
SCENE FILE
(SD CARD)
USER FILE
(SD CARD)
F1 Saved value
F1 Saved value
F1 Saved value
F1 Saved value
F1 Saved value
CARD FUNCTIONS screen
USER FILE � LOAD/SAVE
AG-HPX300P SD CARD
 NOTE
• Running the menu option MENU INIT in the OTHER FUNCTIONS screen returns all current operating status values in the F1 to
F6 scene files, values stored in the camera, current user file settings and camera settings to their factory defaults. This function
does not return the TIMEZONE setting to its factory default.
• Setting data file operations may end in error during playback or when the menu option PC MODE is set to ON in the SYSTEM
SETUP screen. Set PC MODE to OFF before performing file operations.