When using a v-mount type battery – Panasonic AG-HPX300P User Manual

Page 87

Advertising
background image



Chapter


Prepar

ation

When using a V-mount type battery

Mount the V-mount adapter plate. Insert the plate and slide
it as shown below.
• To remove the plate, slide the release lever downwards.

Releaselever

Setting the battery type
• Select the battery type listed under BATTERY SELECT.

Select the menu option BATTERY SELECT from the
setting menu BATTERY SETUP screen.

• When using a battery not listed under BATTERY SELECT:

If it is a NiCD battery, select “NiCd14(14V)” and set each
item according to the battery characteristics. If it is not a
NiCd battery, select TYPE A or TYPE B and set each item
according to the battery characteristics. For details, refer
to [BATTERY SETUP screen] (page 134).

NOTE

• For information about the V-mount adapter plate, please

contact the store where you purchased the camera-recorder.

• With the V-mount adapter plate installed, % (percent) values

cannot be displayed when using batteries that show the
remaining battery capacity.

Advertising