Naming station presets, Listening to station presets, Changing the frequency step – Pioneer VSX-515-S/-K User Manual

Page 56: Using the tuner 08

Advertising
background image

Using the tuner

08

56

En

Naming station presets

For easier identification, you can name your
station presets.

1

Choose the station preset you want to

name.

See

Listening to station presets

below for how

to do this.

2

Press T.EDIT (TUNER EDIT).

The display shows

ST. NAME

, then a blinking

cursor at the first character position.

3

Input the name you want.

Choose a name up to four characters long.

• Use the

MULTI JOG

dial (front panel) or the

ST +/–

buttons (remote) to select

characters.

• Press

ENTER

to confirm a character. If no

character is input, a space is input.

• The name is stored when

ENTER

is pressed

after choosing the fourth character.

Tip

• To erase a station name, simply repeat

steps 1-3 and input four spaces instead of
a name.

• Once you have named a station preset, you

can press (

TUNER

)

DISPLAY

when

listening to a station to switch the display
between name and frequency.

Listening to station presets

You will need to have some presets stored to do
this. See

Saving station presets

above if you

haven’t done this already.

1

Press

TUNER

to select the tuner.

2

Press CLASS to select the class in which

the station is stored.

Press repeatedly to cycle through classes A, B
and C.

3

Press ST +/– to select the station preset

you want.

• You can also use the number buttons on

the remote control to recall the station
preset.

Changing the frequency step

If you find that you can’t tune into stations
successfully, the frequency step may not be
suitable for your country/region. Here’s how to
switch the setting:

VSX-515 model:

1

Switch the receiver into standby.

2

On the front panel, press

STANDBY/

ON

while you press and hold the

CLASS

button.

The channel tuning step alternates between

10K STEP

and

9K STEP

each time you do this.

VSX-815/915 model:

1

Switch the receiver into standby.

2

On the front panel, press

STANDBY/

ON

while you press and hold the

BAND

button.

The channel tuning step alternates between

10K STEP

and

9K STEP

each time you do this.

VSX_815-915.book.fm 56 ページ 2005年3月1日 火曜日 午前10時22分

Advertising
This manual is related to the following products: