Using the sr+ mode with a pioneer plasma display, Other connections 12 – Pioneer VSX-515-S/-K User Manual

Page 74

Advertising
background image

Other connections

12

74

En

Use a 3-ringed miniplug SR+ cable

1

to

connect the

CONTROL IN

jack of this receiver

with the

CONTROL OUT

of your plasma

display.

Before you can use the extra SR+ features, you
need to make a few settings in the receiver. See

The Input Assign menu

on page 75 for detailed

instructions.

To make the most of the SR+ features, you
should connect your source components (DVD
player, etc.) in a slightly different way to that
described in this chapter. For each
component, connect the video output directly
to the plasma display, and just connect the
audio (analog and/or digital) to this receiver.

Using the SR+ mode with a
Pioneer plasma display

VSX-815/915 model only

When connected using an SR+ cable, a
number of features become available to make
using this receiver with your Pioneer plasma
display even easier. These features include:

• On-screen volume display.
• On-screen display of listening mode.
• Automatic video input switching on the

plasma display.

• Automatic volume muting on the plasma

display.

2

See also

The Input Assign menu

on page 75 for

more on setting up the receiver.

1

Make sure that the plasma display and

this receiver are switched on and that they
are connected with the SR+ cable.

See

Using this receiver with a Pioneer plasma

display

above for more on this.

2

To switch SR+ mode on/off, press

RECEIVER

, then the SR+ button.

The front panel display shows

SR+ ON

or

OFF

.

Note

1 • The 3-ringed SR+ cable from Pioneer is commercially available under the part number ADE7095. Contact the Pioneer Cus-
tomer Support division for more information on obtaining an SR+ cable (you can also use a commercially available 3-ringed
mini phone plug for the connection).

• If you connect to a Pioneer plasma display using an SR+ cable, you will need to point the remote control at the plasma dis-

play remote sensor to control the receiver. In this case, you won’t be able to control the receiver using the remote control if you
switch the plasma display off.

DVD player

This receiver

Pioneer plasma

display

Satellite receiver, etc

VIDEO

INPUT 1

VIDEO

INPUT 2

TV/SAT

AUDIO IN

DVD

AUDIO IN

S-VIDEO

VIDEO INPUT

DIGITAL IN

VIDEO

L AUDIO R

SETUP MIC

MCACC

UP

DOWN

MULTI JOG

MASTER
VOLUME

ENTER

AUDIO/VIDEO MULTI-CHANNEL RECEIVER

STANDBY/ON

PHONES

DVD/LD

TV/SAT

DVR/VCR

VIDEO

CD

CD-R/TAPE/MD

TUNER

AUX

STANDARD

ACOUSTIC

EQ

ADVANCED

SURR

ST/DIRECT

/AUTO SURR

SIGNAL
SELECT

LISTENING MODE

QUICK

SETUP

SYSTEM

SETUP

RETURN

SPEAKERS

BAND

TONE

INPUT

ATT

EXTENDED

MODE

TUNING

/STATION

TUNER

EDIT

FL DIMMER

MULTI JOG

2 The automatic volume muting feature is enabled separately; see

The Input Assign menu

on page 75.

RECEIVER

MULTI CONTROL

SOURCE

INPUT

SELECT

DVD/LD

TV/SAT

DVR/VCR

TV CONT

CD

CD-R/TAPE

TUNER

RECEIVER

+10

FL DIMMER

SR

DISC

TUNE

ST

ST

ENTER

D.ACCESS

TOP MENU

DTV MENU

CLASS
MENU

VSX_815-915.book.fm 74 ページ 2005年3月1日 火曜日 午前10時22分

Advertising
This manual is related to the following products: