Lfe attenuator setup, Sr+ setup for pioneer plasma displays, Other settings 13 – Pioneer VSX-515-S/-K User Manual

Page 77

Advertising
background image

Other Settings

13

77

En

English

Français

Deutsch

Nederlands

Italiano

Español

1

Select DUAL MONO from the OTHER

setup menu.

2

Use

/

(cursor up/down) to choose the

setting that you want.

CH1

– Only channel 1 is played

CH2

– Only channel 2 is played

CH1 CH2

– Both channels are played

through the front speakers

3

When you're finished, press

RETURN

.

LFE Attenuator Setup

• Default setting:

ATT 0 dB

Some Dolby Digital and DTS audio sources
include ultra-low bass tones. Set the LFE
attenuator as necessary to prevent the ultra-
low bass tones from distorting the sound from
the speakers.

1

Select LFE ATT from the OTHER setup

menu.

2

Use

/

(cursor up/down) to choose the

setting that you want.

LFEAT 0

– No limiting (recommended

setting)

LFEAT 10

– 10dB of limiting

LFEAT **

– No sound from LFE channel

3

When you're finished, press

RETURN

.

SR+ Setup for Pioneer plasma
displays

VSX-815/915 model only

Make the following settings if you have
connected a Pioneer plasma display to this
receiver using an SR+ cable. Note that the
number of function settings available will
depend on the plasma display you’ve
connected.

See also

Using this receiver with a Pioneer

plasma display

on page 73 and

Using the SR+

mode with a Pioneer plasma display

on page 74.

1

Select ‘SR+’ from the OTHER setup menu.

2

Use

/

(cursor up/down) and

ENTER

to

select the ‘VOL C.’ setting you want.

VOL C. OFF

– The receiver does not control

the volume of the plasma display

VOL C. ON

– When the receiver is switched

to one of the inputs that use the plasma
display (

DVD/LD

, or another one of

functions below), the volume on the
plasma display is muted so only sound
from the receiver is heard.

3

Assign any input source connected to the

plasma display to the corresponding input
number.

Use

/

(cursor left/right) to select the

source (

DVD

,

TV

,

DVR

or

VDEO

), then

/

(cursor up/down) to select the input number.

This matches the receiver’s input source with a
numbered video input on the plasma display.
For example, assign

DVD:3

if you have

connected the your DVD video output to video
input 3 on the plasma display.

4

When you're finished, press

RETURN

.

VSX_815-915.book.fm 77 ページ 2005年3月1日 火曜日 午前10時22分

Advertising
This manual is related to the following products: