Basics of the voice operation, Flow of the voice operation 182, Starting the voice operation 182 – Pioneer SUPER TUNER IIID AVIC-X9310BT User Manual

Page 182: 33 operating your navigation system with voice, Flow of the voice operation, Starting the voice operation

Advertising
background image

p This function is available for AVIC-Z130BT

only.

To Ensure Safe Driving

CAUTION

For your safety, avoid viewing the screen in the
voice operation as much as possible while
driving.

If you use voice operation, select

“US English”

or

“US English (Samantha):TTS” in “Voice

Language

” of “Regional Settings”. If you se-

lect other languages, voice operation will not
be available.

Basics of the voice operation

Your Pioneer navigation system uses the latest
in voice recognition technology. You can use
voice commands to operate many of its func-
tions. This chapter describes where you can
use voice commands, and also what com-
mands the system accepts.
You can use voice commands to operate the
following functions:

! Searching for a location by address
! Setting the route to the selected POI
! Hands-free phoning
! Switching the AV source
! Operating the iPod

p This function is not available while catalo-

ging of iPod is in progress.

Flow of the voice operation

You can start the voice operation any time
even when the map screen is displayed or AV
is operating. (Some operations are not avail-
able.) The basic steps of the voice operations
are as follows.

1 Switch the screen to map screen or AV op-

eration screen.

j

2 Press the

button to activate voice oper-

ations.

j

3 Speak a command into the microphone

after the beep.
When the command is recognized, the na-
vigation system displays next options on
the screen, and pronounces it in some
cases.

j

4 Repeat previous step as necessary.

j

5 The requested operation will be carried out.

p The voice operation may not be operable for a

minute after the navigation system has booted
up.

p The voice operation will be activated 30 sec-

onds after the map screen is displayed.
If the

button does not respond, display

the disclaimer screen and then touch [

OK].

The map screen is displayed.

Starting the voice operation

% Press the

button when the map

screen or the AV operation screen is dis-
played.
The voice operation screen appears.

1

2

3

4

En

182

Chapter

33

Operating your navigation system with voice

Advertising
This manual is related to the following products: