Additionalinformation, Liquid crystaldisplay (lcd) screen, Keeping the display in good condition – Pioneer AVH-P7500DVD User Manual

Page 103: Small fluorescent tube

Advertising
background image

! The display should be used within the tem-

perature ranges shown below.

Operating temperature range: 10 to +50

°C

Storage temperature range: 20 to +80 °C

At temperatures higher or lower than the

operating temperature range the display

may not operate normally.

! The LCD screen of this unit is exposed in

order to increase its visibility within the ve-

hicle. Please do not press strongly on it as

this may damage it.

! Do not place anything on the display when

it is deployed. Also, do not attempt to carry

out angle adjustment, or open/close the

display by hand. Applying strong force to

the display may damage it.

! Do not push the LCD screen with much

force as this may scratch it.

! Be careful not to place anything between

the display and the main body when the

display is opening or closing. If an object

gets between the display and main body,

the display may stop working.

Liquid crystaldisplay (LCD) screen

! If the display is near the vent of an air con-

ditioner when it is opened, make sure that

air from the air conditioner is not blowing

on it. Heat from the heater may break the

LCD screen, and cool air from the cooler

may cause moisture to form inside the dis-

play resulting in possible damage. Also, if

the display is cooled down by the cooler,

the screen may become dark, or the life

span of the small fluorescent tube used in-

side the display may be shortened.

! Small black dots or white dots (bright dots)

may appear on the LCD screen. These are

due to the characteristics of the LCD

screen and do not indicate a problem with

the display.

! At low temperatures, the LCD screen may

be dark for a while after the power is turned

on.

! The LCD screen will be difficult to see if it is

exposed to direct sunlight.

! When using a portable phone, keep the an-

tenna of the portable phone away from the

display to prevent disruption of the video by

the appearance of spots, colored stripes,

etc.

Keeping the display in good

condition

! When removing dust from the screen or

cleaning the display, first turn the system

power off, then wipe with the supplied

cloth.

! When wiping the screen, take care not to

scratch the surface. Do not use harsh or

abrasive chemical cleaners.

Small fluorescent tube

! A small fluorescent tube is used inside the

display to illuminate the LCD screen.

 The fluorescent tube should last for ap-

proximately 10,000 hours, depending on

operating conditions. (Using the display

at low temperatures reduces the service

life of the fluorescent tube.)

 When the fluorescent tube reaches the

end of its useful life, the screen will be

dark and the image will no longer be

projected. If this happens, consult your

dealer or the nearest authorized PIO-

NEER Service Station.

AdditionalInformation

En

103

Appendix

AdditionalInformation

Advertising