Pioneer VSX-D509S - Manual (Page 19)

19
Set up
Preparations
dB
dB
dB
dB
memo
memo
memo
memo
Low cut filter ON/OFF setting mode
Turn the low cut filter ON when distorted sound is output through the sub woofer.
• Initial setting is “OFF”.
• If the SUB WOOFER is set to “OFF” in the SUB WOOFER ON/OFF setting mode, the low
cut filter cannot be set.
Press
% or fi to select low cut filter ON or OFF.
CENTER speaker distance setting mode
Normally as the Center speaker is placed directly in front in the listening room, it is closer to the listening
position than the Front speakers. This means that the sound from the Center speaker will be heard before the
Front speakers. To prevent this, set the Center speaker distance setting to delay the sound from the Center
speaker so that the sound from the Front and Center speakers will be heard at the same time.
• Initial setting is 10 ft.
• When “C
∗
” is selected in SPEAKERS setting mode, the Center distance cannot be set.
• One step equals about 1 ft.
Press
% or fi to set the distance of the CENTER
speaker from the main listening position (up to
30 steps).
SURROUND speakers distance setting mode
Use to set the SURROUND speakers distance. Like the CENTER speaker position, the SURROUND speakers
may be set in a location closer or farther than the FRONT speakers. Set the distance of the SURROUND
speakers accurately to hear sounds coming from both FRONT and SURROUND speakers at the same time.
• Initial setting is 10 ft.
• When “S
∗
” is selected in SPEAKERS setting mode, the SURROUND distance cannot be
set.
• One step equals about 1 ft.
Press
% or fi to set the distance of the
SURROUND speakers from the main listening
position (up to 30 steps).
FRONT speakers distance setting mode
Sets the distance from the FRONT speakers to the listening position.
• Initial setting is 10 ft.
• One step equals about 1ft.
Press
% or fi to set the distance of the FRONT
speakers from the main listening position (up
to 30 steps).