Pioneer CD-IB100II - Manual (Page 16)

Troubleshooting
Symptom Cause Action
iPod doesn
’t
operate cor-
rectly.
Cables are incor-
rectly connected. Disconnect the
cable from iPod.
Once iPod main
menu is displayed,
connect the cable
again.
Reset the iPod.
Understanding error
messages
When you contact your dealer or your nearest
Pioneer Service Center, be sure to record the
error message.
Message Cause Action
ERROR-11 Communication
failure Disconnect the
cable from iPod.
Once iPod main
menu is displayed,
connect the cable
again.
Reset the iPod.
ERROR-21 Old version of
iPod Update the version
of iPod.
ERROR-30 iPod failure Reset the iPod.
NO TRACK No songs Transfer the songs
to iPod.
STOP No songs in the
current list Select a list that
contains the
songs.
Specifications
General
Power source ............................. 14.4 V DC (10.8 V to 15.1 V
allowable)
Grounding system ................... Negative type
Max. current consumption
..................................................... 2.0 A
Dimensions (W × H × D) ... 95 Ч 25 Ч 91 mm
(3-3/4 Ч 1 Ч 3-5/8 in.)
Weight .......................................... 0.33 kg (0.7 lbs)
Note
Specifications and the design are subject to pos-
sible modifications without notice due to im-
provements.
Additional Information
En
16
Appendix