Panasonic 35 - Manual (Page 19)

9
5 Getting started
After connecting the necessary cords, lastly plug in the power cord.
This section describes the steps up to turning on the power.
5.1
Hooking up the connection cable
Plug the connection cable (for the LED head) into its connection port.
Plug the female side of the connection cable into the main unit. Plugging in
the wrong side (the male connector) could bend the connector pins or cause
other issues.
5.2 Connecting the LED
Connecting the head
Warning Warning Warning Warning
LED head
Connection cable
Main unit side LED side
Connection cable
Connector
Lens protector cap
Connector Connector