Operation modes, 3 default settings mode – Panasonic 35 User Manual

Page 29

Advertising
background image

Operation modes

19

6.3

Default settings mode

This mode is used for the units (°C/°F) for head temperature readings, for switching between

READY/BUSY signal, and for setting the buzzer ON/OFF.

* The default values are Celsius (°C) for temperature display, BUSY, and buzzer ON.

[Default settings mode]

1. While pressing down the MODE switch power ON the controller.

2. When the display starts up is displayed.

[Switching between °C/°F display]

1. Use △/▽ to switch between °C (Celsius)/°F (Fahrenheit).

2. Press the SET switch. will be displayed.

[Switching between READY/BUSY signal]

1. Use △/▽ to switch between A=READY/b=BUSY.

2. Press the SET switch. will be displayed.

[Switching the buzzer ON/OFF]

1. Use △/▽ to switch between buzzer ON/OFF.

2. Press the SET switch. will be displayed.

[Exiting from default settings mode]

1. Hold down the SET switch to switch to operation mode.


[Restoring default settings

(all settings are restored to their initial default values)]

1. While in default settings mode, press the MODE switch.

2. will be displayed.

3. Hold down △/▽.

4. will be displayed.

5. Hold down SET. will be displayed. When

appears all settings have been restored to their original

default values, and the controller returns to operation mode.





3 On/oFF

EE | | |

EE

EE CLr

1 C/F

2 A/b

1 C/F

Advertising
This manual is related to the following products: