Panasonic PV DF205 - Manual (Page 35)

35
TV/VCR Operation
Display Features
1
Press DISPLAY
to display or remove the overlay.
When a function button is pressed (PLAY, FF, etc.) or you change
channels, the unit mode or channel number will be displayed.
Whenever a blank section of a tape comes up in Play mode, or
when the selected channel has no broadcast signal with the Weak
Signal Display Feature set to “OFF” (see page 17), the screen will
turn solid blue.
TV/VCR Status & Clock Display
Blue Screen Display
Channel & Function Display
No broadcast signal in TV mode (Only when Weak Signal Display is
set to OFF (See page 17)), or blank tape is played for 5 minutes.
Power turns off.
Note:
• This feature is canceled if any button is pressed during above conditions.
Auto Shut Off
DISPLAY
REC 12:00PM CH 08
0:25 -0:12:34
STEREO SP
SAP
MONO
RATING:PG-13
1 Function Status
5 Current Time
2 Rec Time Remaining
(OTR mode only, see page 25.)
7 Counter
8 Tape Speed
(See page 25.)
3 Receivable Broadcast Types
(See page 18.)
6 Channel
1
2
3
5
6
8
7
4
4 Rating level
08
PLAY