Panasonic SCPM19 - Manual (Page 24)

T
imers and others
24
RQT7369
Using the timers
To cancel the timer
Press [SHIFT] + [˚
˚ ˚ ˚ ˚PLAY/REC] .
To change the settings when the unit is on
To change Action
play/record times Repeat steps 1, 2, 3, and 5 on previous
page.
source/volume 1 Press [SHIFT] + [˚ ˚ ˚ ˚ ˚PLAY/REC].
2 Make changes to the source or vol-
ume.
3 Do steps 4 to 5 on previous page.
A Using the play/record timer
To check the settings when the unit is on
Press [SHIFT] + [CLOCK/TIMER] until “˚
˚ ˚ ˚ ˚PLAY” or “˚ ˚ ˚ ˚ ˚REC”
appears. Two seconds after “˚ ˚ ˚ ˚ ˚PLAY” or “˚ ˚ ˚ ˚ ˚REC” appears, the
settings are displayed in the following order:
Timer Setting display
Play timer Play start time → Play finish time → Play
source → Playback volume.
Record timer Recording start time → Recording finish
time → Recording source.
When the unit is off, press [SHIFT] + [CLOCK/TIMER] to check
the settings until “˚
˚ ˚ ˚ ˚PLAY” or “˚ ˚ ˚ ˚ ˚REC” appears.
To enjoy the desired source after the timer setting is
completed.
The volume level (for play timer) and music source are stored
in the timer memory and the timer will start in these preset
conditions. However, the CD numbers do not get stored in the
timer memory.
1.After step 4 on the previous page, start playing the desired
source.
2.Reset the CD numbers if you have changed any of them,
confirm that a CD or cassette is inserted, then press [ y] to
put the unit on standby.
Notes
• If you turn the unit off and on again while a timer is functioning,
the finish time setting will not be activated.
• If the unit is on, the timer will not function. The unit must be in
the standby mode.
• If AUX is selected as the source, when the timer comes on,
the system turns on and engages AUX as the source. If you
want to playback or record from a connected unit, set the
other unit’s timer to the same time. (See the other unit’s
instruction manual.)
B Using the sleep timer
Using the sleep timer to turn off the unit automatically.
Press [SLEEP] to select:
SLEEP 30 SLEEP 60 SLEEP 90 SLEEP 120
SLEEP OFF
To cancel, Press [SLEEP] to select “SLEEP OFF”.
To display the remaining time, press [SLEEP].
Press [SLEEP] again to change your desired time.
Notes
• The play and sleep timer or the record and sleep timer can
be used together.
• The sleep timer always has priority. Be sure not to overlap
timer settings.
A
CLOCK/
TIMER
SHIFT
B
AUTO OFF
SLEEP
AUTO OFF
SLEEP
RQT7369-1B_23-25_EN 17/2/04, 5:25 pm 24