Panasonic SCPM19 - Manual (Page 25)

T
imers and others
25
RQT7369
A Using the sound quality settings
You can select sound quality with Preset EQ and improve bass
and treble effect with Manual EQ.
Preset EQ
1
Press and hold [SOUND] to select “PRESET EQ”.
Each time you press and hold the button:
MANUAL EQ PRESET EQ
2
Press [SOUND] to select:
Each time you press the button:
Setting Sound quality
HEAVY Adds punch to rock
CLEAR Clarifies higher frequencies
SOFT For background music
VOCAL Adds gloss to vocal
EQ-OFF Cancelled
Manual EQ
1
Press and hold [SOUND] to select “MANUAL EQ”.
Each time you press and hold the button:
MANUAL EQ PRESET EQ
2
Press [SOUND] to select a setting.
Each time you press the button:
BASS TREBLE
Original Display
3
Press [VOL –] or [+ VOL] to adjust the level.
The tone level can be varied within a range of -3 to +3.
Notes
• Preset EQ cannot be used together with Super Sound EQ.
• Changes to sound quality do not affect recordings.
B Enhancing the sound quality
Press [S.SOUND EQ].
The button light is on.
Press the button again to cancel.
The button light goes out.
Using the “live” effect (SURROUND)
Press [SHIFT] + [SURROUND] to add natural width and depth
to the stereo sound. “
” indicator will appear.
To cancel
Press [SHIFT] + [SURROUND] to clear the “
” indicator.
• When listening through headphones, the effect is less
discernible than through the unit’s speakers.
• If interference in FM stereo reception increases, cancel the
surround sound effect.
C Using an external unit
1 Press [AUX].
2 For listening: Proceed to step 3.
For recording: Press [ ¶/8 REC] (recording starts).
3 Start playback from the external source. (For details, refer
to the external unit’s instruction manual.)
Listening with headphones
Reduce the volume level, and connect the headphones.
Plug type: 3.5 mm stereo.
Note
Avoid listening for prolonged periods of time to prevent hearing damage.
A
B
S. SOUND EQ
1 2
3
SHIFT
SURROUND
1 SOUND
2 SOUND
PRESET EQ MANUAL EQ
3
VOL VOL
C
AUX REC /
RQT7369-B_23-25_EN 15/1/04, 6:33 pm 25