Pioneer BDP-LX52 - Manual (Page 37)

37
En
06
Note
• Items that cannot be changed a re indicated in gray. The items that can be selected depend on the player’s status.
• In O ptions, the factory default settings are indicated in bold.
Setting Options Explanation
V
ide
o Ou
t
TV As pect Ratio 16:9 (Widescreen) Select this when connected to a wide (16:9) TV.
4:3 (Standa rd) Select this when connected to a conventional TV.
4:3 Video Out Full 4:3 pictures are displayed over the entire screen.
No rmal 4:3 pictures are displayed with vertical black bars along the sides. Select this
when you cannot switch the as pect ratio to 4:3 on the TV.
4:3 Video Out is only valid when TV Aspect Ratio is set to16:9 (Widescreen).
DVD 16:9 Video Out Letter Box 16:9 pictures are displayed with black bars at the top and bottom when
viewing on a 4:3 sc reen.
Pan & Scan The picture is displayed over the entire screen, with the left and right sides of
the 16:9 picture cropped. Select this to view 4:3 pictures over the entire
sc reen. For some discs, the picture will be displayed in the Letter Box mode
even if Pan & Scan is set.
• DVD 16:9 Video Out is only valid when TV Aspect Ratio is set to 4:3 (Standard).
• DVD 16:9 Video Out is only valid when playing 16:9 pictures of DVD-Video or DVD-R/-RW (VR format) discs. When other 16:9
pictures are played, they are output in the Letter Box mode.
NTSC on PAL TV On Select this when connected to a PAL-only TV. The picture is displayed
co rrectly on the PAL-only TV even when playing a source with a frame/field
rate other than 50 Hz.
Off Select this when connected to an NTSC-com patible TV.
• The facto ry default setting is On for U.K. models, Off for other models.
• Many recent PAL TVs support the input of NTSC signals, in which case this can be set to Off. Also check your TV’s operating
inst ructions.
A
u
di
o Ou
t
Dolby Digital Out
* Only valid fo r the DIGITAL
OUT terminal.
Dolby Digital 1 Dolby Digital audio signals a re output. With BD-ROMs, the secondary audio
and inte ractive audio are mixed for output.
Dolby Digital 2 Dolby Digital audio signals a re output. With BD-ROMs, the signals are output
without mixing the seconda ry audio and interactive audio signals.
Dolby Digital 
PCM
Select this when the connected AV receiver or amplifier, etc., is not
com patible with Dolby Digital audio signals. The Dolby Digital audio signals
a re converted into linear PCM audio signals for output.
DTS Out
* Only valid fo r the DIGITAL
OUT terminal.
DTS 1 DTS Digital Su rround audio signals are output. With BD-ROMs, the
seconda ry audio and interactive audio are mixed for output.
DTS 2 DTS Digital Su rround audio signals are output. With BD-ROMs, the signals
a re output without mixing the secondary audio and interactive audio signals.
DTS  PCM Select this when the connected AV receiver or amplifier, etc., is not
com patible with DTS Digital Surround audio signals. The DTS Digital
Su rround audio signals are converted into linear PCM audio signals for
out put.
AAC Out
* Only valid fo r the DIGITAL
OUT terminal.
AAC Select this when the connected AV receiver or amplifier, etc., is compatible
with AAC audio signals. The AAC audio signals a re output.
AAC  PCM
Select this when the connected AV receiver or amplifier, etc., is not
com patible with AAC audio signals. The AAC audio signals are converted into
linea r PCM audio signals for output.
DTS Downmix Stereo DTS-HD Maste r Audio signals, DTS-HD High Resolution Audio signals or
DTS Digital Su rround audio signals converted to linear PCM audio signals
a re converted into 2-channel (stereo) signals for output.
Lt/Rt DTS-HD Maste r Audio signals, DTS-HD High Resolution Audio signals or
DTS Digital Su rround audio signals converted to linear PCM audio signals
a re converted into 2-channel signals compatible with Dolby Surround for
out put (when the connected AV receiver or amplifier, etc., is compatible with
Dolby P ro Logic, the AV receiver or amplifier outputs the linear PCM audio
signals as su rround audio signals).
LX52_VXJ5_IBD_EN.book 37 ページ ２００９年３月３日 火曜日 午後７時２９分