Easy connections, Connecting up 02 – Pioneer DV-656A User Manual

Page 13

Advertising
background image

Connecting Up

02

13

En

See the next page if you want to use an
S-Video, component or a D video connection.

• If you need another pair of stereo

outputs (and don’t need to use the
multichannel analog outputs), you can
use the

AUDIO OUT (5.1ch) FRONT

L / R jacks (page 15).

2

Connect the supplied AC power cord

to the AC IN inlet, then plug into a power
outlet.

• Before unplugging the player from the

power outlet, make sure you first switch
it into standby using either the front

panel

STANDBY/ON button, or the

remote control, and wait of the

-OFF-

message to disappear from the player’s
display.

• For the above reasons, do not plug this

player into a switched power supply
found on some amplifiers and AV
receivers.

The setup described here is a basic setup
that allows you to play discs using just the
cables supplied with the player. In this setup,
stereo audio is played through your TV.

• This player is equipped with copy

protection technology. Do not connect
this player to your TV via a VCR using AV
cables, as the picture from this player
will not appear properly on your TV. (This
player may also not be compatible with
some combination TV/VCRs for the
same reason; refer to the manufacturer
for more information.)

1

Connect the VIDEO OUT (1) and

AUDIO OUT (2ch) jacks to a set of A/V
inputs on your TV.
Use the supplied red/white stereo audio and
yellow video cable. Make sure you match up
the left and right audio outputs with their
corresponding inputs for correct stereo
sound.

Easy connections

DIGITAL AUDIO

OUT

AUDIO

OUT

(2ch)

CONTROL

OPTICAL

COAXIAL

IN

OUT

L

R

L

R

AUDIO OUT

(5.1ch)

CENTER

SUB

WOOFER

SURROUND

FRONT

S-VIDEO

OUT

VIDEO

OUT

COMPONENT VIDEO OUT

P

B

P

R

Y

TV

DV-656A

A/V IN

To power outlet

Advertising
This manual is related to the following products: